From the Control Panel dialog box, double-click Add or Remove Programs. Normal operation will be restored within 1 minute. Shipping insurance is at your expense. Be sure to include a statement or report fully detailing the defect and the conditions under which it was observed. If the equipment is not under warranty, you will be invoiced for the cost appearing on this report.
Contact the manufacturer regarding service of this equipment. Recycle or dispose of your product including electric and electronic accessories properly, in accordance with local regulations. . At the Physical layer L1 all the incoming traffic is being retransmitted backward without changing. Store unit at room temperature in a clean and dry area. Never look directly into a live fiber, and ensure that your eyes are protected at all times. Validity of specifications depends on operating conditions.
Removing Microsoft ActiveSync You can remove Microsoft ActiveSync by using the functions found in Windows Control Panel. Provide user name and password. The calibration validity period can be longer or shorter depending on the intensity of use, environmental conditions and unit maintenance. Do not dispose of it in ordinary garbage receptacles. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the user guide, may cause harmful interference to radio communications. Support personnel will determine if the equipment requires service, repair, or calibration. Keep the unit out of direct sunlight.
Establish connection with the unit over Telnet protocol. Return the equipment, prepaid, to the address given to you by support personnel. December 2, 2009Version number: 1. The limits set by these standards are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. Make sure that the version for your system disk on your unit is 3.
In case of unsuccessful upgrade, the functionality of the unit may be restored. The information contained in this publication is subject to change without notice. To switch between layers 1, 2, 3, 4 or turn loopback off, press this button till required selection is made. The Technical Support Group is available to take your calls from Monday to Friday, 7:30 a. Please be prepared to provide the part number, serial number, purchase order number, nature of problem, and ship-to address. This equipment was sold after August 13, 2005 as identified by the black rectangle.
The information presented in this section is provided as a reference only. To turn off the unit switch off the power supply unit. If you use Windows operating system:1. Be sure to write the number on the shipping slip. Lastmanuals, for instance, does not offer a translation service. WarrantyService and RepairsService and RepairsTo send any equipment for service or repair:1. Avoid high humidity or large temperature fluctuations.
Ethernet Tester Analyzer 155 Remote ManagementEthernet Tester Analyzer 17Telnet Telecommunication Network is a network protocol used to access a remote unit through a personal computer. Do not proceed unless you understand and meet the required conditions. Avoid high humidity or significant temperature fluctuations. Eastern Time in North America. The unit is ready in 15 second. The splash screen screen you The version of the system disk that is installed on your unit is prior to 2.
This function allows to test the network without changing its settings. From the Add or Remove Programs dialog box, click Microsoft ActiveSync x. If you use Linux operating system:1. When you are prompted to install the drivers, simply select the Install the software automatically check box and click Next. With this package you can: detect macrobends, view and print the related information. Get the unit from the box and make the external inspection.
TransportationMaintain a temperature range within specifications when transporting the unit. Note: if you want to restore default settings of the unit hold the button of a loops level choice L for 5 seconds. Clean the unit casing and front panel with a cloth slightly dampened with water. The following steps are recommended to minimize the possibility of damage: Pack the unit in its original packing material when shipping. After repair, the equipment will be returned with a repair report. Pack the equipment in its original shipping material. Equipment normally protected against exposure to direct sunlight, precipitations and full windpressure.
All inquiries regarding service, calibration and technical assistance should be directed to the Customer Service department:To accelerate the process, please have information such as the name and the serial number as well as a description of your problem, close at hand. For example, the calibration validity period can be longer or shorter depending on the intensity of use, environmental conditions and unit maintenance. You cannot see the new The version of the system disk that is installed on your updates for your products from unit is too old. Ethernet Tester Analyzer 216 MaintenanceEthernet Test Set 23To help ensure long, trouble-free operation: Always clean fiber-optic connectors before using them. If any liquids are spilled on or into the unit, turn off the power immediately and let the unit dry completely.